Publications with 30-49 Citations

Total: 31 papers.

Agrawal, D.C. & Raj, R. 1990, "Ultimate Shear Strengths of Copper Silica and Nickel Silica Interfaces", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 126, pp. 125-131.

Ashby, M.F., Raj, R. & Gifkins, R.C. 1970, "Diffusion-Controlled Sliding at a Serrated Grain Boundary", Scripta Metallurgica, vol. 4, no. 9, pp. 737-&.

Baik, S. & Raj, R. 1987, "Liquid-Phase Bonding of Silicon-Nitride Ceramics", Journal of the American Ceramic Society, vol. 70, no. 5, pp. C105-C107.

Bordia, R.K. & Raj, R. 1986, "Analysis of Sintering of a Composite with a Glass Or Ceramic Matrix", Journal of the American Ceramic Society, vol. 69, no. 3, pp. C55-C57.

Das, D., Saha, A., Russek, S.E., Raj, R. & Bahadur, D. 2003, "Large magnetoresistance in (La1-xCaxMnO3)(1-y): ZrO2 composite", Journal of Applied Physics, vol. 93, no. 10, pp. 8301-8303.

Dehm, G., Scheu, C., Ruhle, M. & Raj, R. 1998, "Growth and structure of internal Cu/Al2O3 and Cu/Ti/Al2O3 interfaces", Acta Materialia, vol. 46, no. 3, pp. 759-772.

Ducamp, V.C. & Raj, R. 1989, "Shear and Densification of Glass Powder Compacts", Journal of the American Ceramic Society, vol. 72, no. 5, pp. 798-804.

Gopalan, V. & Raj, R. 1996, "Domain structure and phase transitions in epitaxial KNbO3 thin films studied by in situ second harmonic generation measurements", Applied Physics Letters, vol. 68, no. 10, pp. 1323-1325.

Gustafson, T.W., Panda, P.C., Song, G. & Raj, R. 1997, "Influence of microstructural scale on plastic flow behavior of metal matrix composites", Acta Materialia, vol. 45, no. 4, pp. 1633-1643.

Hsu, W.Y. & Raj, R. 1995, "X-Ray Characterization of the Domain-Structure of Epitaxial Lead Titanate Thin-Films on (001)-Strontium-Titanate", Applied Physics Letters, vol. 67, no. 6, pp. 792-794.

Kennefick, C.M. & Raj, R. 1989, "Copper on Sapphire - Stability of Thin-Films at 0.7-Tm", Acta Metallurgica, vol. 37, no. 11, pp. 2947-2952.

Lim, L.C. & Raj, R. 1985, "Continuity of Slip Screw and Mixed-Crystal Dislocations Across Bicrystals of Nickel at 573-K", Acta Metallurgica, vol. 33, no. 8, pp. 1577-1583.

Liniger, E. & Raj, R. 1987, "Packing and Sintering of Two-Dimensional Structures made from Bimodal Particle-Size Distributions", Journal of the American Ceramic Society, vol. 70, no. 11, pp. 843-849.

Liu, Y.P., Liew, L.A., Luo, R.L., An, L.N., Dunn, M.L., Bright, V.M., Daily, J.W. & Raj, R. 2002, "Application of microforging to SiCN MEMS fabrication", Sensors and Actuators A-Physical, vol. 95, no. 2-3, pp. 143-151.

Lu, J.P. & Raj, R. 1991, "Ultra-High Vacuum Chemical Vapor-Deposition and Insitu Characterization of Titanium-Oxide Thin-Films", Journal of Materials Research, vol. 6, no. 9, pp. 1913-1918.

Lu, J.P., Wang, J.D. & Raj, R. 1991, "Solution Precursor Chemical Vapor-Deposition of Titanium-Oxide Thin-Films", Thin Solid Films, vol. 204, no. 1, pp. L13-L17.

Mckee, R.A., Walker, F.J., Conner, J.R. & Raj, R. 1993, "Basi2 and Thin-Film Alkaline-Earth Silicides on Silicon", Applied Physics Letters, vol. 63, no. 20, pp. 2818-2820.

Panda, P.C., Wang, J.D. & Raj, R. 1988, "Sinter-Forging Characteristics of Fine-Grained Zirconia", Journal of the American Ceramic Society, vol. 71, no. 12, pp. C507-C509.

Pena-Alonso, R., Sicurelli, A., Callone, E., Carturan, G. & Raj, R. 2007, "A picoscale catalyst for hydrogen generation from NaBH4 for fuel cells", Journal of Power Sources, vol. 165, no. 1, pp. 315-323.

Raj, R. 1987, "Analysis of the Sintering Pressure", Journal of the American Ceramic Society, vol. 70, no. 9, pp. C210-C211.

Raj, R., An, L.N., Shah, S., Riedel, R., Fasel, C. & Kleebe, H.J. 2001, "Oxidation kinetics of an amorphous silicon carbonitride ceramic", Journal of the American Ceramic Society, vol. 84, no. 8, pp. 1803-1810.

Raj, R. & Ashby, M.F. 1972, "Grain-Boundary Sliding, and Effects of Particles on its Rate", Metallurgical Transactions, vol. 3, no. 7, pp. 1937-&.

Raj, R. & Ghosh, A.K. 1981, "Stress Rupture", Metallurgical Transactions A-Physical Metallurgy and Materials Science, vol. 12, no. 7, pp. 1291-1302.

Raj, R., Shih, H.M. & Johnson, H.H. 1977, "Intergranular Fracture at Elevated-Temperature", Scripta Metallurgica, vol. 11, no. 10, pp. 839-842.

Saha, A., Raj, R. & Williamson, D.L. 2006, "A model for the nanodomains in polymer-derived SiCO", Journal of the American Ceramic Society, vol. 89, no. 7, pp. 2188-2195.

Shah, S.R. & Raj, R. 2002, "Mechanical properties of a fully dense polymer derived ceramic made by a novel pressure casting process", Acta Materialia, vol. 50, no. 16, pp. 4093-4103.

Singh, R.B.K., Hales, S., de Wet, N., Raj, R., Hearnden, M. & Weinstein, P. 2001, "The influence of climate variation and change on diarrheal disease in the Pacific Islands", Environmental health perspectives, vol. 109, no. 2, pp. 155-159.

Soraru, G.D., Pederiva, L., Latournerie, M. & Raj, R. 2002, "Pyrolysis kinetics for the conversion of a polymer into an amorphous silicon oxycarbide ceramic", Journal of the American Ceramic Society, vol. 85, no. 9, pp. 2181-2187.

Wang, J.D. & Raj, R. 1991, "Interface Effects in Superplastic Deformation of Alumina Containing Zirconia, Titania Or Hafnia as a 2nd Phase", Acta Metallurgica Et Materialia, vol. 39, no. 11, pp. 2909-2919.

Wang, J.G. & Raj, R. 1984, "Influence of Hydrostatic-Pressure and Humidity on Superplastic Ductility of 2 Beta-Spodumene Glass-Ceramics", Journal of the American Ceramic Society, vol. 67, no. 6, pp. 385-390.

Zhang, Z.W. & Raj, R. 1995, "Influence of grain size on ferroelastic toughening and piezoelectric behavior of lead zirconate titanate", Journal of the American Ceramic Society, vol. 78, no. 12, pp. 3363-3368.

Boulder Workshops:
•Polymer-Derived–Ceramics (2012)
•NHSC-Mat&Struct (2012)
•Electro-Chemo-Mechanical (2012)
•a poem
•a short story
•who am I
•current and past
•latest results
•workshops` news
•other news